Detailed description

Discoveryopt DGPR3 – Low Universal Mount for 34 and 30 mm Tubes

The Discoveryopt DGPR3 is a premium two-piece pair of scope rings for Picatinny rails. The rings are made for 34 mm tubes as standard, and with the supplied precision-machined aluminium reducer insert they also fit riflescopes with a 30 mm tube. One mount therefore stays useful even if you later move to a riflescope with a larger tube.

One Mount, Two Tube Sizes

The reducer insert is not plastic but machined aluminium with a polished inner surface, so the tube rests on a metal surface rather than on a soft liner. For 30 mm tubes use the rings with the insert; for 34 mm tubes remove the insert.

Low Mounting Height

The tube centreline sits 0.97" (approx. 24.6 mm) above the Picatinny rail, which keeps the riflescope close to the rifle. This gives a comfortable cheek weld and, for many shooters, a more natural stance.

The maximum front lens diameter is 47 mm. This is the outer diameter including the lens cap, not the nominal optical diameter. At this diameter the riflescope clears the rail by approx. 1 mm. If your riflescope's objective is larger, choose a taller mount.

Design and Material

  • 6061-T6 aluminium — the lower and upper half of each ring are each CNC-machined from a single block
  • Hard-anodised finish — wear-resistant, matte black coating
  • Three screws per side — the screw positions are numbered, making it easy to keep an even, controlled tightening sequence
  • Engraved markings — the tube size, height and torque value can be read on the ring, so there is no need to look for the manual
  • No built-in cant — 0 MOA; any inclination comes from the rail on the rifle
  • Shock resistance — 1000 G according to the manufacturer

Picatinny Rails Only

The DGPR3 mounts on Picatinny (MIL-STD-1913) rails only. A Weaver rail looks similar, but the slot width and spacing may differ, so choose this mount for Picatinny rails. If you are not sure which rail your rifle has, write to us and we will gladly help you identify it.

Installation and Torque

The manufacturer's maximum values are: 25 in-lbs (approx. 2.8 N·m) for the screws that clamp to the rail, and 20 in-lbs (approx. 2.3 N·m) for the screws that hold the tube. On a rifle with lighter recoil you may lower these slightly, but always evenly, to the same value on every screw. Tighten the screws gradually, following the engraved numbering.

As these are relatively low torque values, it is worth using a precise torque screwdriver. Typical torque wrenches are often inaccurate in this range. It is also worth checking the screws after the first few shots.

Technical Specifications

  • Model — DGPR3
  • Manufacturer — Discoveryopt
  • Tube diameter — 34 mm (without insert) and 30 mm (with reducer insert)
  • Tube centre height — 0.97" (approx. 24.6 mm)
  • Rail — Picatinny
  • Design — two-piece ring pair, low
  • Material — 6061-T6 aluminium, aluminium reducer insert
  • Finish — hard-anodised
  • Max. front lens diameter — 47 mm (including lens cap)
  • Max. torque — 25 in-lbs (to the rail), 20 in-lbs (on the tube)

What's in the Box

  • Mount — 1 pair (two rings with reducer insert)
  • Torx (star) key — 1 pc

The riflescope is not included.

Who Is It For?

The DGPR3 is recommended for anyone looking for a low, Picatinny-only mount for a 34 mm or 30 mm riflescope. It is a good choice if you use several riflescopes or may change tube size later, because you can keep using the same pair of rings. It also suits hunters and sport shooters who mount a mid-sized riflescope (front lens up to 47 mm) and like clear, engraved torque markings.

Customer Experience

The DGPR3 series is still new, and there is not enough independent feedback for it yet. The summary below is based on customer reviews of other (7075) models in the Discoveryopt ring family, so it reflects the family's general experience.

Customers most often point out the clean machining and the precise fit. One customer who works in gunsmithing found that the rings fitted the tube well without lapping. Several praise the value for money and see the torque values engraved on the ring as an advantage. Source: Amazon customer reviews and customer reviews on the manufacturer's web shop.

Join our Facebook and YouTube channels!
Facebook page: https://www.facebook.com/riflescopeshop
Facebook group: https://www.facebook.com/groups/riflescopeshop
YouTube channel: https://www.youtube.com/@riflescopeshop

Any questions?
Contact us through the web shop and we will help you choose the best solution for your riflescope and rifle!

Recommended accessories

Alternatives

Similar products

Reviews

Be the first to review!

Write a review

Thanks for a detailed, helpful review!
Reviews are moderated before publishing.