Detailed description

MitaPoint One-Piece Quick-Release Offset Universal Riflescope Mount for Picatinny Rail

This one-piece, quick-release riflescope mount is for shooters who want to use one scope on several firearms, or who simply want to take the optic off and put it back quickly. It has an offset design, attaches to Picatinny rails and is made for 30 mm tubes. With the included plastic reducer inserts it also fits riflescopes with a 25.4 mm (1 inch) tube.

Universal: for 30 mm and 25.4 mm tubes

The mount is made for a 30 mm tube diameter. The plastic reducer inserts allow it to be used with 25.4 mm tube riflescopes too, which is handy if you use optics with different tube sizes or plan to buy another scope later.

For Picatinny rails – and what about Weaver?

The mount is made for Picatinny rails. The slots of a Picatinny rail are wider than those of a Weaver rail, so this mount cannot be fitted to a Weaver rail. Before buying, check which rail system your firearm has. The Picatinny rail is increasingly common on modern firearms and air rifles.

Quick-release cam lever – one scope, several firearms

The mount locks onto the rail with a cam-lever clamp. Flipping the lever over makes the cam tighten the clamping screw, so the mount closes and opens in a single move, without special tools. The clamp always tightens with the same force, and the screw on the other side lets you adjust the clamping force (torque) to your rail and firearm.

The slots of the Picatinny rail give the mount a defined position, so a removed scope is easier to return to the same place. If you switch between firearms, mark on the scope which turret settings belong to which firearm. After remounting, it is a good idea to fire a few confirmation shots.

Offset mount: more flexible positioning

The mount is 136 mm long and its clamping length on the rail is 80 mm. Thanks to the offset design it also works well on shorter rails, and setting the required eye relief can be easier. Eye relief can differ from shooter to shooter, so try out the position of the scope before final tightening.

Height and objective lens diameter

The mount is of high to medium-high height, with the tube centre line at 32.5 mm. The stated 64 mm is the maximum outer diameter of the objective bell including the lens cap, not the nominal glass diameter. The available clearance also depends on how the scope is mounted, so for larger objectives ask us before buying or test the fit before final mounting.

Technical specifications

  • Tube diameter — 30 mm and 25.4 mm (1 inch, with plastic reducer inserts)
  • Rail — Picatinny
  • Type — one-piece, offset, universal, quick-release (cam lever)
  • Mount height — high to medium-high
  • Tube centre height — 32.5 mm
  • Length — 136 mm
  • Clamping length — 80 mm
  • Maximum objective lens diameter — 64 mm (including lens cap)
  • Material — aluminium alloy
  • Colour — black

What is in the package

The package contains the mount (the clamping screw is built in), plastic reducer inserts for 25.4 mm tubes and a hex key. The riflescope is not included.

Who do we recommend it to?

We recommend it to target shooters, hunters, recreational shooters and airsoft players, as well as silhouette and HFT shooters. It is a good choice if you use one riflescope on several firearms and need an affordable mount that lets you swap the optic quickly. It can also be used with scopes for driven hunts (LPVO/MPVO). On firearms with stronger recoil, adjust the tension of the cam lever carefully with the screw and check it regularly.

User feedback in a nutshell

There is no standalone feedback for this exact MitaPoint product yet, but the same design (one-piece, offset, quick-release Picatinny mount) exists under several other brands. The summary below is based on customer feedback for these (Amazon customer reviews, OpticsPlanet, Airgun Nation forum).

  • Zero — one customer reports that after removal and remounting the scope went back to the same place and kept its zero
  • Tightness — another customer found the quick release so tight that a tool was needed to open it, yet the mount held up
  • Stronger firearms — one review says that to secure the mount firmly, the quick release became unusable on anything stronger than a .22; another user ran it on two rifles for over 1000 rounds, had it come loose once, and would use a fixed mount on a single long-range rifle
  • Quick release in general — on the Airgun Nation forum the view came up that quick-release clamps do not tighten enough and need a wrench at the end, while another member used quick-release rings on an air rifle for years
  • Rings and inserts — a torque wrench is recommended for the ring screws; according to one review, plastic reducers for 1-inch tubes suit only low-power firearms

Do you have a question?
Contact us at riflescopeshop.com and we will help you choose the best solution for your riflescope and firearm!

Join our Facebook and YouTube channels!

Recommended accessories

Alternatives

Similar products

Reviews

Be the first to review!

Write a review

Thanks for a detailed, helpful review!
Reviews are moderated before publishing.