MitaPoint One-Piece Low Riflescope Mount for 30 mm Tube, Picatinny Rail
The low, one-piece MitaPoint mount is made for riflescopes with a 30 mm tube and attaches to a Picatinny rail. It can be used for sport shooting, hunting and recreational shooting with riflescopes whose outer diameter at the front lens does not exceed 56 mm.
Design and material
The mount is made of aluminium alloy with a black matte finish that gives it an understated look and reduces unwanted light reflection. One-piece construction means that the base and the two rings form a single unit, so you do not have to align two separate rings on the rail.
The distance between the two rings is fixed: there is 58 mm of clear space between their inner edges. The central part of the riflescope that carries the turrets must fit into this space, and the tube needs straight sections inside the rings. Between the rings there is 8 mm of clearance under the tube. It is worth checking these dimensions against your own riflescope before ordering.
Dimensions and compatibility
- Tube diameter — 30 mm
- Rail — Picatinny
- Mount type — one-piece
- Mount height — low
- Tube centre height — 29 mm
- Length / mounting length — 100 mm
- Clear distance between the rings — 58 mm
- Maximum outer diameter at the front lens — 56 mm
What does 56 mm mean? It is not the optical size of the front lens, but the total outer diameter of the riflescope at the front lens, including the tube and the lens cap. The centre line of a 30 mm tube sits 29 mm above the rail, so the front end of the riflescope leaves about 1 mm of clearance above the rail. If you tilt the tube forward, this must be taken into account as well, because it reduces the available space.
Picatinny, not Weaver. Picatinny and Weaver rails look similar at first glance, but the size and spacing of their cross slots differ. This mount is made for Picatinny rails and does not fit Weaver rails. If you are not sure which rail your firearm has, write to us and we will help you find out.
Installation and use
The mount attaches to the rail with three clamping bolts and nuts. You will need a hex key, plus a suitable wrench for the nuts. The mount is a simple, affordable solution that works well when installed carefully. The screws call for a low tightening torque, so ordinary torque wrenches are often too imprecise; for this we recommend a precise torque screwdriver. Check the screws after the first few shots, and look them over from time to time afterwards.
Calibre and areas of use
- Air guns — spring-piston air rifle*, PCP air rifle
- Small calibre — .22 Long Rifle (.22 LR), approx. 100–160 J
- Medium calibre — .223 Remington / 5.56×45 NATO, approx. 1550–1800 J; 9 mm Luger (9×19)
- Areas of use — sport shooting, hunting, airsoft, recreational shooting, silhouette shooting, HFT shooting
* For spring-piston air rifles we assume a faultless rifle in proper working order. A malfunctioning spring-piston air rifle (for example, one that suffers a loss of air compression) can produce shaking and recoil that no riflescope or mount can withstand.
Who do we recommend it for?
We recommend it to shooters who want a low, simple and affordable one-piece mount for a 30 mm tube riflescope on a Picatinny rail, and who are willing to install it carefully. It can be a good choice for air rifles and .22 LR firearms, as well as for sport and recreational shooting. For a riflescope with a larger objective, check the 56 mm limit first.
Join our Facebook and YouTube channels!
- Facebook page: https://www.facebook.com/riflescopeshop
- Facebook group: https://www.facebook.com/groups/riflescopeshop
- YouTube channel: https://www.youtube.com/@riflescopeshop
Have a question?
Get in touch with us in the webshop and we will help you choose the best solution for your riflescope and firearm!